Cracks patched, holes filled, surfaces sanded smooth, and painted to match. One crew, one visit.
Paint only looks as good as the surface underneath it. Cracks, nail pops, holes, water stains, and uneven seams all telegraph through a fresh coat of color, no matter how premium the paint is. That is why surface preparation accounts for 60% to 70% of total labor time on a professional interior painting project, and drywall repair is the most critical part of that prep work.
G&G Professional Painting is a licensed and insured drywall repair and painting company based in Lawrenceville, GA. Unlike standalone drywall contractors who patch and leave, or painters who skim over damage, we handle both the repair and the finish coat in one project. Your walls get fixed properly, primed, and painted to match the surrounding surface so the repaired area disappears completely. One contractor, one schedule, no coordinating between separate trades.
Doorknob holes, furniture impact holes, anchor holes, and larger openings left behind by plumbing, electrical, or HVAC work. Small holes under 4 inches get filled, sanded, and spot-primed. Larger holes require cutting out the damaged section, installing a new piece of drywall, taping the seams, applying 2 to 3 coats of joint compound, sanding between each coat, and priming before paint.
Settling cracks, stress cracks along seams, hairline cracks around windows and doors, and corner cracks. We cut out loose material, apply mesh tape or paper tape depending on the crack type, float joint compound over the repair, sand smooth, and prime. Cracks caused by structural movement may reappear if the underlying cause is not addressed, and we will let you know if we see signs of a deeper issue during our assessment.
Drywall that has absorbed water loses structural integrity and cannot simply be painted over. The damaged section must be cut out and replaced with new drywall. We identify the extent of the water damage, remove all compromised material, install new drywall, tape, mud, sand, prime, and paint. The water source must be fixed first, or the damage will recur.
Nail pops are one of the most common drywall issues in Atlanta homes, especially in newer construction where framing lumber shrinks as it dries. The nail or screw pushes through the surface, creating a visible bump or crack. We reset or replace the fastener, apply compound, sand smooth, and prime. Most homes develop nail pops within the first 1 to 3 years after construction.
Walls with rough texture, visible seams, patchy repairs from previous work, or overall uneven surfaces benefit from a full skim coat. We apply a thin layer of joint compound over the entire surface, sand it smooth, and prime it for a clean, uniform finish. Skim coating is also the standard finish after popcorn ceiling removal.
Not all walls and ceilings are smooth. Many Atlanta homes have orange peel, knockdown, skip trowel, or other textured finishes. After a repair, the patched area must match the surrounding texture or it will be visible. Our crews replicate the existing texture pattern so the repair blends seamlessly. Textured drywall repair typically costs more than smooth-wall work due to the additional skill and time required.
Popcorn ceilings were standard in homes built from the 1950s through the 1980s. Removing them involves scraping the texture down to the underlying surface, repairing any damage uncovered during removal, skim coating the ceiling smooth, priming, and painting. Popcorn ceiling removal costs approximately $6 per square foot including labor and finishing. Homes built before 1978 may have asbestos in the ceiling texture, which requires testing before removal.
For renovations, room additions, or areas where the existing drywall is beyond repair, we handle full drywall installation in Atlanta including hanging, taping, mudding, sanding, and finishing to a paint-ready surface.
We inspect the damage in person, identify the cause, determine the scope of repair needed, and provide a written, itemized estimate. If we spot signs of a deeper issue like a plumbing leak or structural settling, we will tell you before any work begins.
We cover floors, furniture, and surrounding surfaces. Drywall work generates dust, and we contain it with sheeting and clean up after each stage.
Depending on the damage type, we patch, tape, and apply 2 to 3 coats of joint compound with sanding between each coat. Each coat needs drying time, so multi-coat repairs may take more than one visit. Small patches can be completed in a few hours. Larger repairs typically take 1 to 2 days.
Once the final coat of compound is dry, we sand the surface smooth, feathering the edges so the repair blends with the surrounding wall. We prime the repaired area to seal the compound and create a uniform base for paint.
Unlike drywall-only contractors who patch and leave, we paint the repaired area to match the surrounding wall using the same premium Sherwin-Williams and Benjamin Moore coatings we use on every project. No need to hire a second contractor. The result is a seamless wall where the damage is invisible.
Painting over damaged drywall is one of the most common mistakes homeowners and contractors make. Cracks, nail pops, bumps, water stains, and uneven seams all show through fresh paint, especially under natural light or overhead fixtures. No amount of premium paint can hide a surface defect because paint follows the contour of whatever is underneath it.
Professional drywall repair before interior painting ensures that the finished walls are smooth, uniform, and flawless. The paint bonds to a properly primed, defect-free surface and lasts longer because there are no weak spots where peeling, cracking, or staining can start. If your walls have visible damage, fixing it before painting saves money in the long run by avoiding a repaint within 1 to 2 years.
We repair the damage and paint to match in a single scope. No coordination between a drywall contractor and a painter. One crew, one schedule, one finished result.
We carry full liability coverage on every residential and commercial project, so your property is protected while our crew is on site.
Our owner and co-owner oversee every project directly and provide daily updates. You talk to the people who run the company.
Orange peel, knockdown, skip trowel, smooth, and custom textures. We replicate the existing pattern so the repair blends seamlessly with the surrounding wall.
After repair, we prime and paint with Sherwin-Williams and Benjamin Moore products so the patched area matches the rest of the wall in color, sheen, and durability.
If we find rotted trim, damaged baseboards, or structural wood issues behind the drywall, our carpentry crew handles it in the same project. Need a full room or whole-home repaint after repairs? Our interior and exterior painting crews handle that too.
Atlanta’s humid subtropical climate subjects residential properties to average annual relative humidity levels above 70% and roughly 50 inches of rainfall each year. When intense moisture swings collide with North Georgia’s notorious red clay soil—which expands during wet months and contracts during summer droughts—foundations settle and framing lumber naturally shifts. This continuous structural movement and moisture exposure make Metro Atlanta homes uniquely vulnerable to stubborn nail pops, recurring stress cracks above doorframes, and compromised drywall cores. At G&G Professional Painting, our repair solutions are engineered specifically to hold up against Georgia’s demanding environmental conditions. We cut away moisture-weakened gypsum completely, secure shifting seams with high-strength taping systems, and seal every patch using moisture-resistant primers and topcoats from Sherwin-Williams and Benjamin Moore. The result is a durable, invisible repair that withstands Atlanta’s seasonal humidity shifts and protects your interior walls for years to come.
Small patches can be completed in a few hours. Medium repairs typically take a full day. Larger repairs or water damage work may take 1 to 2 days because each coat of joint compound needs drying time before the next coat and final sanding.
Yes. We prime and paint every repaired area to match the surrounding wall. You do not need to hire a separate painter. The repaired area blends seamlessly with the rest of the surface.
Yes. We match orange peel, knockdown, skip trowel, smooth, and other common textures. Texture matching requires additional skill and time, which is reflected in the cost, but the result is a seamless repair that is invisible once painted.
Look for discoloration, soft or spongy spots, bubbling or peeling paint, sagging, or a musty smell. Drywall that has absorbed water cannot be restored and must be cut out and replaced. The water source must be fixed before repair, or the damage will return.
Yes. We scrape the popcorn texture, repair any damage underneath, skim coat the ceiling smooth, prime, and paint. Homes built before 1978 should be tested for asbestos in the ceiling texture before removal begins.
Yes, and most of our clients do. Drywall repair is part of the prep process for a quality interior paint job. Bundling both into one project saves money and ensures the finished walls are smooth, primed, and painted to a uniform standard.
Yes. We provide drywall repair and painting for offices, retail spaces, restaurants, and multi-unit properties across Atlanta. Learn more about our commercial painting services.
Nail pops happen when framing lumber shrinks as it dries, pushing the nail or screw head through the drywall surface. They are especially common in newer construction within the first 1 to 3 years. We reset the fastener, apply compound, sand, prime, and paint.
We are based in Lawrenceville, GA and serve the greater Atlanta metro including Gwinnett County, DeKalb County, and Fulton County. Contact us to confirm service in your area.
One crew repairs, primes, and paints to match, so the damage disappears. Get a written, itemized estimate with no obligation.
